Ricoh IS760D Guía de instalación Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 312
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
Turning the Power On/Off
33
2
Turning the Power On/Off
Important
Do not turn the power of the scanner ON before the software installation. If
you run the Found New Hardware Wizard beforehand, you will not be
able to install the software correctly. When the Found New Hardware Wiz-
ard started before the installation, click the [Cancel] button to discontinue the
wizard.
1. Power Off
2. Power On
Turning the Power On when Connected with SCSI Interface
Turn the power on from the farthest devices from the computer on the daisy
chain. Start the computer last.
Note
The scanner will not be detected if you start the computer first.
Turning the Power On when Connected with USB/IEEE1394
Interface
There is no order to turn on the power when you connect the scanner with USB
or IEEE1394 interface. You can turn on either the scanner or the computer first.
Turning the Power Off
There is no order to turn off the power. You can turn off either the scanner or the
computer first.
ADC101S
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 311 312

Comentarios a estos manuales

Sin comentarios