
Print Settings
79
3
Print Settings
You can configure and register up to four sets of settings for printing the
scanned data by a printer. Memory areas named “Default”, “User 1”, “User 2”,
and “User 3” are available for registering the Print Settings. You can easily recall
the settings you have registered to “User 1”, “User 2”, or “User 3”, which means
you don't have to configure the detailed settings each time you print a scanned
data. The settings registered in “Default” apply when you print the scan data
without selecting “User 1”, “User 2”, or “User 3”, or without manually config-
uring the Print Settings.
Reference
The System Settings menu is available by pressing the {
{{
{User Tools}
}}
} key.
For the configuration using the System Settings menu, see p.51 “Configuring
[System Settings]”.
Information to Register in
[
Print Settings
]
❖
❖❖
❖ Image Density
Use this item to adjust density of the image for scanning by a scanner. You can
select one of the seven steps from 1 (lightest) to 7 (darkest).
❖
❖❖
❖ Original Size
Use this item to select the size of an original to be scanned by a scanner.
The available sizes of an original vary according to a scanner connected to this
machine.
• When you select [Custom Size], you can specify the dimensions of the Scan
area (width and height) of the scanner you use.
❖
❖❖
❖ Duplex
Use this item to select a type of duplex prints.
• 1 Sided Orig. -> 1 Sided Print
Scans a single-sided original and prints onto a single-sided page.
• 1 Sided Orig. -> 2 Sided Print
Scans two single-sided originals and prints onto a two-sided page.
• 2 Sided Orig. -> 1 Sided Print
Scans each side of a two-sided original and prints onto two separate pages.
• 2 Sided Orig. -> 2 Sided Print
Scans a two-sided original and prints onto a two-sided page.
Comentarios a estos manuales