Ricoh IS760D Guía de instalación descargar pdf (Pagina 237)

Performing Scan Operation

127

5

Performing Scan Operation

Starting a Scan Operation

To start with originals on the ADF

A

AA

A

Confirm that the E-mail Ready

screen is displayed.

When “

Select destina-

tion(s).

” is displayed, no desti-

nation is selected. Select a

destination to display “

Ready

” on

the screen.

B

BB

B

Press the {

{{

{Start}

}}

} key of this ma-

chine.

Scanning originals starts on the

ADF of the scanner connected to

this machine.

Note

❒ To interrupt scanning, press the

{

{{

{Clear/Stop}

}}

} key.

❒ When “

Show Options after

Each Scan Job

” is selected for

[End of Scan Option] under

[2.Send Scan Settings], a screen

for selecting the next operation

appears after scanning of all the

originals on the ADF of the

scanner is completed.

• Press [Add] to continue scan-

ning by adding the scanned

data to the current image file.

• Press [New Job] to finish the

current scanning job and

send the scanned data. You

can start a new job with the

current settings after the

scanned data is sent.

• Press [OK] to finish the cur-

rent scanning job, send the

scanned data, and then re-

turn to the initial screen at

the time when the power has

been turned on.

If you do not press any key,

this machine acts as if [OK]

has been pressed, after the

specified period.

When scanning finishes properly,

the e-mail is sent to the E-mail

(SMTP) Server. The “B” appears

at the upper right corner of the

screen while the e-mail is sent.

Note

❒ You cannot perform any opera-

tions while the “B” is dis-

played on the screen.

❒ Do not turn off the power of this

machine while the “B” is dis-

played on the screen.

The “B” disappears when the e-

mail has been sent to the E-mail

(SMTP) Server, and the E-

mail/Send File standby screen ap-

pears.

AHQ004S

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 311 312

Comentarios a estos manuales

Sin comentarios