Ricoh IS760D Guía de instalación descargar pdf (Pagina 291)

Using Wireless LAN

181

11

• Ad hoc mode

A method of communicating

with other client computers,

peer to peer, without an ac-

cess point. The same commu-

nication channel must be

used for all client computers.

• 802.11 Ad hoc mode

A method of communicating

with other client computers,

peer to peer, without an ac-

cess point. The same commu-

nication channel and SSID

must be used for all client

computers.

❖

❖❖

❖ SSID

Enter the SSID (Service Set Iden-

tifier) you want to use, using up

to 32 characters. The SSID cur-

rently in use appears in paren-

theses.

This information appears if

[802.11 Ad hoc mode] or [Infra-

structure mode] is selected in the

[Communication Mode] list.

The SSID is an identifier used

when connecting between an

access point and a wireless LAN

client. Only a wireless LAN cli-

ent and an access point that

have the same SSID can com-

municate with each other.

❖

❖❖

❖ Channel

If [802.11 Ad hoc mode] or [Ad hoc

mode] is selected in the [Commu-

nication Mode] list, select a com-

munication channel.

The channel is a set radio fre-

quency used for wireless LAN

(IEEE 802.11b). Client comput-

ers using the same channel can

communicate with each other.

❖

❖❖

❖ WEP Setting

Select whether to enable or dis-

able WEP (Wired Equivalent

Privacy) encryption.

WEP encryption protects wire-

less data communication. To

communicate using WEP, data

from both transmitting and re-

ceiving computers must be set

with the same WEP Key. To en-

able WEP encryption, select [En-

able] in the list, and then enter

the WEP key in the [WEP Key]

box.

❖

❖❖

❖ WEP Key and Confirm WEP Key

The same WEP key must be en-

tered in [WEP Key] and [Confirm

WEP Key] boxes.

• 64 bit Key

When [Enable] is selected in

the [WEP Setting] list, enter a

10-digit hexadecimal WEP

key value in [WEP Key] and

[Confirm WEP Key] boxes. En-

ter the WEP key value with-

out the prefix “0x.” The value

entered appears as the “*.”

• 128 bit Key

When [Enable] is selected in

the [WEP Setting] list, enter a

26-digit hexadecimal WEP

key value in [WEP Key] and

[Confirm WEP Key] boxes. A

128-bit key provides higher

security than a 64-bit key. En-

ter the WEP key value with-

out the prefix “0x.” The value

entered appears as the “*.”

W

WW

W

Click [Apply] to apply the settings.

The set value will be written into

this machine.

X

XX

X

Remove the cable you connected

from this machine in the step

A

AA

A

.

Y

YY

Y

Restore the network settings on

the client computer.

1 2 ... 286 287 288 289 290 291 292 293 294 295 296 ... 311 312

Comentarios a estos manuales

Sin comentarios