Ricoh IS760D Guía de instalación descargar pdf (Pagina 182)

Configuring the Scanner Settings

❖

❖❖

❖ Scanning Area

Specify the position where scanning ends by a scanner you use when [Custom

Area Setting] is selected in the [Scan Size] list.

Enter the offset from the position specified for [Start Positn.], in millimeters or

inches.

Note

❒ This setting is enabled only when [Custom Area Setting] is selected in the

[Scan Size] list.

❒ You can select millimeters or inches to specify the position using [Unit of

Measure] in [2.SendScan Settings] under the Scanner Features menu. See p.60

“Unit of Measure” for details.

❒ Make sure that you specify the vertical/horizontal positions and scanning

areas of a scanner you use to be within the available scan area. The avail-

able scan area varies depending on where you place the originals (on the

exposure glass or on the ADF of the scanner).

❒ Configure the vertical and horizontal values of both start position and

scanning area within the allowances of a scanner connected to this ma-

chine. The scanning area and the type of originals are different according

to scanners to connect. Refer to the instruction manual of the correspond-

ing scanner.

❖

❖❖

❖ Image Density

This item lets you select the scanning density of a scanner you use in one of the

seven steps. The larger the value is set, the darker the scanned image becomes.

❖

❖❖

❖ Erase Color

This setting is available only when “Black and White:Text”, “Black and

White:Text/Photo”, “Black and White:Photo”, or “Black and White:Gray

Scale” is selected in the [Scan Type] list. You can select an erase color from red,

green, or blue, which color is deleted (ignored) when scanning is performed

by a scanner you use. Select “Off” when you wish to disable Erase Color.

Note

❒ The availability of configuration and selection items are different accord-

ing to a scanner to be connected to this machine.

❒ The Erase Color function may not work as expected depending on the col-

ors on the originals.

❖

❖❖

❖ Noise Reduction

This item lets you select the size of spots erased from the scanned image as

unwanted noise. Spot size is indicated in dots. When [Off] is selected, all small

spots are scanned.

Note

❒ The numbers in each of the options (“3x3”, “4x4”, and “5x5”) stand for the

minimum range of detecting isolated dots on the original. All the isolated

dots that are fully covered by the specified range are erased, in accordance

with the option you select.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 311 312

Comentarios a estos manuales

Sin comentarios

Ricoh IS760D Guía de instalación Pagina 182

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Ricoh IS760D