Ricoh IS760D Guía de instalación Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 312
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
Setting up the Scanner
28
2
Connecting with USB Interface
Note
Please use the recommended USB cable. Using other cables might occur an ir-
regular operation. As for the recommended cables, please ask your service
representative.
You can connect the scanner to two computers at the same time. One with the
SCSI interface, and one with the USB 2.0 interface. Though, you cannot use
the scanner at the same time from two computers. Interfaces are switched au-
tomatically when you change from one of the computer to the other.
A
AA
A
Open the cover of the switch box on the lower left of the frontside of the
scanner.
Note
Push the knob of the cover to the left and pull the cover to open.
B
BB
B
Confirm the DIP Switch No.2 is in the ON position.
Note
If the DIP Switch No.2 is set to OFF, set it to ON. If the switch is set to OFF,
"Found New Hardware Wizard" will not start. .
Press the Hard Reset Switch if you changed the DIP Switch while the pow-
er is ON. p.34 Using the Hard Reset Switch
ADC015S
ADC080S
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 311 312

Comentarios a estos manuales

Sin comentarios