Ricoh Aficio MP 161F Guia de preparacion descargar pdf (Pagina 67)

Remote Maintenance by telnet

59

2

❖ Netmask configuration

msh> ifconfig “interface_

name” netmask “address”

The following explains how to

configure a subnet mask

255.255.255.0 on Ethernet inter-

face.

msh> ifconfig ether net-

mask 255.255.255.0

❖ Broadcast address configuration

msh> ifconfig “interface_

name” broadcast “address”

❖ Changing the Interface

msh> ifconfig “interface”

up

• You can specify either the Eth-

ernet interface or IEEE 802.11b

interface when using the op-

tional IEEE 802.11b interface

unit.

Note

❒ To get the above addresses, contact

your network administrator.

❒ Use the default configuration if

you cannot obtain setting address-

es.

❒ The IP address, subnet mask and

broadcast address are the same as

that for the Ethernet interface and

IEEE 802.11b interface.

❒ TCP/IP configuration is the same

for both Ethernet and IEEE 802.11

interface. If interfaces are changed,

the new interface inherits the con-

figuration.

❒ Use "0x" as the initial two letters of

a hexadecimal address.

info

Use the "info" command to display

printer information such as paper

tray, output tray, and printer lan-

guage.

❖ Printer information display

msh> info

Reference

p.75 “Getting Printer Information

over the Network”

ipp

Use the “ipp” command to view and

configure IPP settings.

❖ Viewing settings

The following command displays

the current IPP settings:

msh> ipp

❖ IPP timeout configuration

Specify how many seconds the

computer waits before canceling

an interrupted print job. The time

can be entered between 30 to 65535

seconds.

msh> ipp timeout [30 -

65535]

❖ IPP user authorization configuration

Use IPP user authorization to re-

strict users to print with IPP. The

default is “off”.

msh> ipp auth {basic|di-

gest|off}

• User authorization settings are

“basic” and “digest”.

• If user authorization is speci-

fied, register a user name. You

can register up to 10 users.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 121 122

Comentarios a estos manuales

Sin comentarios