Ricoh Aficio MP 161F Guia de preparacion descargar pdf (Pagina 30)

Using a Printer Server

22

1

H To create a new print server, press

the {Insert} key, and then enter a

print server name.

For a currently defined print serv-

er, select a print server in the [Print

Server] list.

Use the same printer name speci-

fied using NIB Setup Tool.

I From the [Print Server Information]

menu, select [Print Server Configura-

tion].

J From the [Print Server Configuration]

menu, select [Printer Configuration].

K Select the printer indicated as [Not

Installed].

Use the same printer number spec-

ified as the remote printer number

using NIB Setup Tool.

L To change the printer name, enter

a new name.

A name “printer x” is assigned to

the printer. The “x” stands for the

number of the selected printer.

M As type, select [Remote Parallel,

LPT1].

The IRQ, Buffer size, Starting form,

and Queue service mode are auto-

matically configured.

N Press the {Esc} key, and then

click [Yes] on the confirmation

message.

O Press the {Esc} key to return to

[Print Server Configuration Menu].

P Assign print queues to the created

printer.

Q From [Print Server Configuration

Menu], select [Queues Serviced By

Printer].

R Select the printer created.

S Press the {Insert} key to select a

queue serviced by the printer.

You can select several queues.

T Follow the instructions on the

screen to make other necessary

settings.

Following these steps, check that

the queues are assigned.

U Press the {Esc} key until "Exit?"

appears, and then select [Yes] to

exit PCONSOLE.

V Start the print server by entering

the following from the console of

the NetWare server.

If the print server is in operation,

quit and restart it.

❖ To quit

CAREE: unload pserver

❖ To start

CAREE: load pserver

print_server_name

Note

❒ If the printer works as config-

ured, the message "Waiting for

job" appears.

Setting up using NIB Setup Tool

A Log on to the file server as a su-

pervisor or supervisor equivalent.

B Start NIB Setup Tool from the

[Start] menu.

C Click [Property Sheet], and then

click [OK].

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 121 122

Comentarios a estos manuales

Sin comentarios