Ricoh SP204SF Instrucciones de operaciones descargar pdf (Pagina 37)

Loading Paper

Load a stack of paper for printing in the input tray.

• When loading paper, be sure to configure the paper size and paper type for the bypass tray and

Tray 1. When printing a document, specify the paper size and paper type and select the paper

tray in the printer driver so that the settings configured when paper is loaded can be used for

printing.

• To print on paper fed from Tray 1, remove the paper loaded in the bypass tray. Otherwise, the

paper in the bypass tray is fed first.

• Do not load paper in the bypass tray when the machine is warming up.

• Do not load paper in the bypass tray when Energy Saver mode is enabled.

• Curled paper may jam. Straighten curled paper before loading.

Loading Paper into Tray 1

1. Pull Tray 1 out slowly, and then remove it using both hands.

CTT062

Place the tray on a flat surface.

Loading Paper

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 203 204

Sin comentarios

Ricoh SP204SF Instrucciones de operaciones Pagina 37