Ricoh SP204SF Instrucciones de operaciones descargar pdf (Pagina 29)

• If [Communication Mode:] is set to [802.11 Ad-hoc Mode], [WPA2 - PSK -AES] and [WPA/

WPA2 Mixed Mode] in [Security Method:] cannot be selected.

1. Connect the machine and the computer with a USB cable.

2. On the [Start] menu, click [All Programs].

3. Click [Smart Organizing Monitor for SP xxx Series].

4. Click [Smart Organizing Monitor for SP xxx Series Status].

5. If the machine you are using is not selected, click [Select Device...], and then select the

machine's model.

6. Click [OK].

7. On the [User Tool] tab, click [Printer Configuration].

8. On the [Wi-Fi] tab, set [Communication Mode:] to [802.11 Ad-hoc Mode].

9. In [SSID:], enter the SSID.

The characters that can be used are ASCII 0x20-0x7e (32 characters).

10. Select [Security Method:].

11. In the [Channel Number] box, enter the channel number.

12. Specify the appropriate settings in [WEP / WPA / WPA2 Settings].

The maximum number of characters that can be entered in [WEP Key / Passphrase (PSK):]

depends on the [Key Length:] and [Key Format:] settings. Specify settings in accordance with the

following table:

Security Method Key Length Key Format

WEP Key

(Maximum character)

Open System - None

- - -

Open System - WEP 64 bit ASCII 5 characters

Hexadecimal 10 characters

128 bit ASCII 13 characters

Hexadecimal 26 characters

Shared Key - WEP 64 bit ASCII 5 characters

Hexadecimal 10 characters

128 bit ASCII 13 characters

Hexadecimal 26 characters

Configuring Network Settings

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 203 204

Sin comentarios

Ricoh SP204SF Instrucciones de operaciones Pagina 29