Ricoh Remote Communication Gate S Guía de instalación descargar pdf (Pagina 23)

Communication Ports

Remote Communication Gate S uses the following ports. Refer to this list when configuring Remote

Communication Gate S.

• When Remote Communication Gate S is installed on a firewall-protected Windows environment,

opening the required ports is necessary.

• Set

the ports so that they do not conflict with other connections and services running on the computer.

1. Click [Start] > [Control Panel] > [Windows Firewall].

2. Select [General], and then set it to [On].

3. Select the [Exceptions] tab, and then select [File and Printer Sharing].

4. Add the required ports:

Port Number Protocol Description

8080 (default)

TCP Web server for Apache

80 (default)

TCP Web server for IIS

8443 (default)

TCP Web server for Apache

443 (default)

TCP Web server for IIS (@Remote service)

162 SNMP Used for the Remote Communication Gate

S system

8011 TCP

41021 TCP

50109 TCP

55512 TCP

55513 TCP

135 (RPC) TCP Authentication Manger (communication

between server and administrator's

computer)

50304 (RSI) UDP

6001

(DCOM) TCP

Enter the port numbers that were specified when Remote Communication Gate S was installed. The port number

must be a number between 1 and 65535. Do not use letters or double-byte characters.

Set this port only if you are using @Remote service. Do not use for other purposes.

System Requirements

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 75 76

Sin comentarios

Ricoh Remote Communication Gate S Guía de instalación Pagina 23