Ricoh SP 201n Guía de instalación descargar pdf (Pagina 14)

5. Press the [ ] or [ ] key to select [Off], and then press the [OK] key.

If you change this setting, the machine automatically reboots itself before the procedure can

be completed. When this happens, wait for the reboot to finish, repeat steps 1 to 3, and then

proceed to the next step.

6. Press the [

] or [ ] key to select [IP Address] , and then press the [OK] key.

7. Enter the machine’s IPv4 address using the number keys.

Press the [ ] key to move between fields.

8. Enter the values in all fields, and then press the [OK] key.

Specify the subnet mask and default gateway address as required in accordance with the

network environment.

After a setting has been changed, the machine automatically reboots itself.

For details about configuring the IPv6 address, see the User Guide .

You cannot configure the network settings while the machine is operating (printing, receiving a

fax, etc.). Correspondingly, the machine cannot receive print jobs and faxes while the network

settings are being configured (after clicking [Network Settings]).

•

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Ricoh SP 201n Guía de instalación Pagina 14