Ricoh Aficio CL3000e DOT Instrucciones de operaciones Pagina 202
- Pagina / 257
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Operating Instructions Administrator Reference
202
❖
❖❖
❖ Viewing setting
The following command displays the WINS server IP address.
msh> wins
Example out put:
wins: primary server 0.0.0.0 secondary server 0.0.0.0
Note
❒ If DHCP is used to start from the network, the current WINS server address is displayed. This
address, however, is not displayed if DHCP is not used.
❒ If the IP address obtained from DHCP differs from the WINS IP address, the DHCP address is
the valid address.
❖
❖❖
❖ Address configuration
Use this command to configure a WINS server IP address.
msh> wins {primary|secondary} IP_address
Note
❒ Use the "primary" to configure a primary WINS server IP address.
❒ Use the "secondary" to configure a secondary WINS server IP address.
AutoNet
Use the set command to configure Autonet.
Note
❒ For more information about Autonet, see p.232 “Using AutoNet”.
msh>set autonet {on|off}
Select "on" to activate Autonet, and "off" to deactivate it.
- 4.NetWare Configuration 3
- 6.Using a Web Browser 3
- 9.Appendix 5
- Introduction 7
- How to Read This Manual 9
- Print Server Configuration 12
- Netware Configuration 13
- Configuring the Protocols 14
- Configuring the printer 15
- SmartNetMonitor 20
- ❖ TCP/IP 20
- A Click [IPP] 21
- LPR Port 22
- Standard TCP/IP Port 22
- ❖ Default Printer 23
- Changing Port Settings 29
- Setting Up Options 30
- Setting the Printer Shared 33
- Installing Software 37
- C:> ping 192.168.15.16 53
- Reply from 192.168.15.16 53
- Request timed out 53
- Active Protocol: 73
- TCP/IP 73
- NetWare: 73
- *Active 73
- ❖ SmartNetMonitor for Admin 74
- Service is available 76
- Setting Up as a Print Server 77
- F:> USERLIST 78
- F:> PCONSOLE 80
- CAREE: unload pserver 82
- ❖ To use NetWare 5 83
- F:> NLIST USER /A/B 86
- Selecting [Wizard] 95
- Selecting [Property Sheet] 95
- Changing the Paper Type 97
- Setting a Password 100
- 6. Using a Web Browser 101
- Going to the Top Page 102
- E Click [Apply] 107
- Changing Names and Comments 108
- SmartNetMonitor for Admin 109
- Web Browser 111
- SmartNetMonitor for Client 114
- Menu Chart 116
- Accessing the Main Menu 120
- ZHBS020E 121
- ZHBS050E 121
- ❒ Default : Plain Paper 123
- Paper Input 125
- Paper Input: 127
- Tray Priority 127
- List/Test Print 130
- List/Test Print: 131
- Config. Page 131
- Printing 131
- PCL Menu 135
- Host Interface 135
- Interface Information 135
- Error Log 135
- Maintenance Menu 136
- Maintenance Menu Parameters 137
- Reference 138
- Changing the Maintenance Menu 141
- Removing Protect 143
- Maintenance: 144
- Color Regist 144
- Maintenance 144
- System Menu 149
- System Parameters 150
- ❒ Default: Off 151
- ❒ Default: Not Print 151
- ❒ Default: Auto Detect 152
- ❒ Default: 152
- • Metric: A4 152
- • Inch: 8 1/2 x 11 152
- ❒ Default: On 154
- System 156
- System : 157
- MisfeedRecovery 157
- E. Saver2 Timer 157
- *30 minutes 158
- Host Interface Menu 159
- Host Interface Parameters 160
- Network Setup 161
- You can set the IP address 161
- Menu Description 161
- You can set the Subnet mask 162
- Auto , 10 Mbps, 100 Mbps 164
- ❒ Default: All zero 165
- ❒ Default: Active 165
- ❒ Default: 802.11 Ad hoc 166
- ❒ Default: 11 166
- ❒ Default: Auto 166
- Limitation 167
- Host Interface 168
- ZHBS040E 169
- ❒ Default: 10.00 pitch 173
- ❒ Default: Roman-8 173
- Changing the PCL Menu 174
- PCL Menu: 175
- Orientation 175
- Orientation: 175
- *Portrait 175
- Language 178
- Language: 178
- *English 178
- 9. Appendix 180
- Spool Printing 181
- Remote Maintenance by telnet 183
- Commands List 184
- ❖ Changing the Interface 186
- Parameter Meaning 188
- Protocol 189
- Printer status 190
- System log information 191
- IP address 198
- The default is ad hoc mode 199
- ❖ Configuration 201
- Changing the Host Name 203
- Changing the Password 205
- Printer current status 206
- Printer configuration 208
- ❖ *3 Input Tray: Status 210
- Print Job Information 212
- Print Log Information 213
- Message List 219
- Precautions 228
- NetWare Printing 230
- Using DHCP 231
- Using AutoNet 232
- Configuring a WINS Server 233
- Using telnet 234
- Specifications 237
- Printing 1300 W or less 239
- Energy Saver 9 W or less 239
- Mainframe only 239
- During Printing 63 dB (A) 239
- Stand-by 40 dB (A) 239
- Sound Pressure level 240
- Printer Utility for Mac 243
- JPEG LIBRARY 248
- Authors Name List 249
- Copyright © 2002 256
- EE GB G081-6620 257
Comentarios a estos manuales
Relacionado con productos y manuales para Impresión y escaneo Ricoh Aficio CL3000e DOT
Impresión y escaneo Ricoh 70 Manual de usuario
(12 paginas)
(12 paginas)
Impresión y escaneo Ricoh D091 Manual de usuario
(6 paginas)
(6 paginas)
Impresión y escaneo Ricoh 9040 Especificaciones
(33 paginas)
(33 paginas)
Impresión y escaneo Ricoh 3590DNP Manual de usuario
(25 paginas)
(25 paginas)
Impresión y escaneo Ricoh Type 2500 Manual de usuario
(106 paginas)
(106 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.170 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Med