Ricoh Aficio CL3000e DOT Instrucciones de operaciones Pagina 201
- Pagina / 257
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Operating Instructions Administrator Reference
201
WINS
Use the wins command to configure the WINS server settings
For more information about WINS server settings, see p.233 “Configuring a WINS Server”.
❖
❖❖
❖ Configuration
Use the set command to make WINS active or inactive.
msh> set wins {on|off}
• "on" means active and "off" means inactive.
auth [open|shared] You can set the authorized mode when using WEP. The
specified value and the authorized mode are as follows:
open: Open system authorized (default)
shared: Shared key authorized
rate [auto|11m|5.5m|2m|1m] You can set the IEEE 802.11b transmitting speed.
The transmitting speed you specify here is the speed at
which data is sent. You can receive data at any speed.
auto: automatically set (default)
11m: 11 Mbps fixed
5.5m: 5.5 Mbps fixed
2m: 2 Mbps fixed
1m: 1 Mbps fixed
Parameter Value to be configured
- 4.NetWare Configuration 3
- 6.Using a Web Browser 3
- 9.Appendix 5
- Introduction 7
- How to Read This Manual 9
- Print Server Configuration 12
- Netware Configuration 13
- Configuring the Protocols 14
- Configuring the printer 15
- SmartNetMonitor 20
- ❖ TCP/IP 20
- A Click [IPP] 21
- LPR Port 22
- Standard TCP/IP Port 22
- ❖ Default Printer 23
- Changing Port Settings 29
- Setting Up Options 30
- Setting the Printer Shared 33
- Installing Software 37
- C:> ping 192.168.15.16 53
- Reply from 192.168.15.16 53
- Request timed out 53
- Active Protocol: 73
- TCP/IP 73
- NetWare: 73
- *Active 73
- ❖ SmartNetMonitor for Admin 74
- Service is available 76
- Setting Up as a Print Server 77
- F:> USERLIST 78
- F:> PCONSOLE 80
- CAREE: unload pserver 82
- ❖ To use NetWare 5 83
- F:> NLIST USER /A/B 86
- Selecting [Wizard] 95
- Selecting [Property Sheet] 95
- Changing the Paper Type 97
- Setting a Password 100
- 6. Using a Web Browser 101
- Going to the Top Page 102
- E Click [Apply] 107
- Changing Names and Comments 108
- SmartNetMonitor for Admin 109
- Web Browser 111
- SmartNetMonitor for Client 114
- Menu Chart 116
- Accessing the Main Menu 120
- ZHBS020E 121
- ZHBS050E 121
- ❒ Default : Plain Paper 123
- Paper Input 125
- Paper Input: 127
- Tray Priority 127
- List/Test Print 130
- List/Test Print: 131
- Config. Page 131
- Printing 131
- PCL Menu 135
- Host Interface 135
- Interface Information 135
- Error Log 135
- Maintenance Menu 136
- Maintenance Menu Parameters 137
- Reference 138
- Changing the Maintenance Menu 141
- Removing Protect 143
- Maintenance: 144
- Color Regist 144
- Maintenance 144
- System Menu 149
- System Parameters 150
- ❒ Default: Off 151
- ❒ Default: Not Print 151
- ❒ Default: Auto Detect 152
- ❒ Default: 152
- • Metric: A4 152
- • Inch: 8 1/2 x 11 152
- ❒ Default: On 154
- System 156
- System : 157
- MisfeedRecovery 157
- E. Saver2 Timer 157
- *30 minutes 158
- Host Interface Menu 159
- Host Interface Parameters 160
- Network Setup 161
- You can set the IP address 161
- Menu Description 161
- You can set the Subnet mask 162
- Auto , 10 Mbps, 100 Mbps 164
- ❒ Default: All zero 165
- ❒ Default: Active 165
- ❒ Default: 802.11 Ad hoc 166
- ❒ Default: 11 166
- ❒ Default: Auto 166
- Limitation 167
- Host Interface 168
- ZHBS040E 169
- ❒ Default: 10.00 pitch 173
- ❒ Default: Roman-8 173
- Changing the PCL Menu 174
- PCL Menu: 175
- Orientation 175
- Orientation: 175
- *Portrait 175
- Language 178
- Language: 178
- *English 178
- 9. Appendix 180
- Spool Printing 181
- Remote Maintenance by telnet 183
- Commands List 184
- ❖ Changing the Interface 186
- Parameter Meaning 188
- Protocol 189
- Printer status 190
- System log information 191
- IP address 198
- The default is ad hoc mode 199
- ❖ Configuration 201
- Changing the Host Name 203
- Changing the Password 205
- Printer current status 206
- Printer configuration 208
- ❖ *3 Input Tray: Status 210
- Print Job Information 212
- Print Log Information 213
- Message List 219
- Precautions 228
- NetWare Printing 230
- Using DHCP 231
- Using AutoNet 232
- Configuring a WINS Server 233
- Using telnet 234
- Specifications 237
- Printing 1300 W or less 239
- Energy Saver 9 W or less 239
- Mainframe only 239
- During Printing 63 dB (A) 239
- Stand-by 40 dB (A) 239
- Sound Pressure level 240
- Printer Utility for Mac 243
- JPEG LIBRARY 248
- Authors Name List 249
- Copyright © 2002 256
- EE GB G081-6620 257
Comentarios a estos manuales
Relacionado con productos y manuales para Impresión y escaneo Ricoh Aficio CL3000e DOT
Impresión y escaneo Ricoh 70 Manual de usuario
(12 paginas)
(12 paginas)
Impresión y escaneo Ricoh D091 Manual de usuario
(6 paginas)
(6 paginas)
Impresión y escaneo Ricoh 9040 Especificaciones
(33 paginas)
(33 paginas)
Impresión y escaneo Ricoh 3590DNP Manual de usuario
(25 paginas)
(25 paginas)
Impresión y escaneo Ricoh Type 2500 Manual de usuario
(106 paginas)
(106 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.277 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Med