Ricoh VT1730 Instrucciones de operaciones descargar pdf (Pagina 38)

Thermal Head

DAILY MAINTENANCE

While pushing out the platen roller

release levers (located on both sides

of the feed roller),

grip both ends of the

feed roller and lift it straight up.

Clean the thermal head as follows:

(1) Wipe the surface of the thermal head with a

damp cloth.

(2) Clean the surface of the thermal head several

times using the cleaner pen with cleaning

solution. (The cleaner pen is stored in the

carton box as an accessory.)

(3) Dry the surface of thermal head with a clean

dry cloth.

~ Make sure to put the cap back onto the

cleaning solutionbottle.

~ Replace the felt of the cleaner pen if it

becomes dirty.

Grip the platen roller release levers,

and put the feed roller back in its

original position. While pushing

the right platen roller release lever

strongly until it is set completely, set

the platen roller release levers in its

original position.

Place the master roll back in its original position. See page 6.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 62 63

Sin comentarios

Ricoh VT1730 Instrucciones de operaciones Pagina 38