Ricoh CLP22 Guia de preparacion descargar pdf (Pagina 484)

100

101

Cleaning and Adjusting the Printer

❒ Each time the {U} or {T} key is pressed, the value increases or decreases

respectively, in increments of 1.

❒ The correction value can be set between 0 and 6.

G Press the {# Enter} key after setting the K (black) gradation. The cursor

shifts to M (magenta).

H Set the gradation correction values for M (magenta), C (cyan), and Y (yel-

low) using the same procedure as for the K (black).

I If you finished all settings, ensure that the cursor is on the correction

value for Y (yellow), and then press the {# Enter} key.

The example shows the display of the control panel when the correction value

for each color is changed to 2.

J Check [Yes] is displayed, and press the {# Enter} key to print the correc-

tion result.

K Check gradation correction sheet 1. To save the correction values,

check [Save and exit] is displayed and press the {# Enter} key. If you do not

want to save the correction values after this procedure, press the {U} or

{T} key to display [Exit don't save], and then press the {# Enter} key.

❒ If you complete this procedure without saving the correction values, the

changes will not be applied to subsequent print jobs.

This concludes the setting for correction 1. Next, proceed to correction 2.

L Press the {T} key to display [Start Calibr. 2], and then press the {# Enter}

key.

Calibrate 1:

K:2 M:3 C/Y:3/3

Calibrate 1:

K:2 M:2 C/Y:2/2

Calibrate 1:

Save and exit

Calibrate 1:

Exit don't save

1 2 ... 479 480 481 482 483 484 485 486 487 488 489 ... 535 536

Comentarios a estos manuales

Sin comentarios

Ricoh CLP22 Guia de preparacion Pagina 484

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Ricoh CLP22