Ricoh 480W Instrucciones de operaciones Pagina 78

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 124
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 77
Troubleshooting
68
3
Memory is full.
The machine's memory is full
due to scanning originals or
performing a function. The
number of originals that can
be stored in memory depends
on the size of originals and
function settings.
When Sort is selected,
press [Exit] to copy
scanned originals, and
then copy remaining origi-
nals.
When the Job Preset func-
tion is selected, check the
number of preset jobs, and
then try scanning the orig-
inals again.
Rotate Sort is not
available with this
image size.
Select another paper
or cancel Rotate
Sort mode.
The scanned original is too big
to rotate.
You cannot use rotate sort
with A0 (E), A1(D) originals.
An unsuitable paper size for
rotate sort has been set.
Set paper of the following pa-
per width:
Metric version:
594 mm and 420 mm
(A2)
420 mm and 297 mm
(A3)
297 mm and 210 mm
(A4)
Inch version (Engineer-
ing)
8
1
/
2
" and 11" (A)
11" and 17" (B)
17" and 22" (C)
Inch version (Architec-
ture)
9" and 12" (A)
12" and 18" (B)
18" and 24" (C)
Maximum number of
sets is NN
The number of copies exceeds
maximum.
Change the maximum copy
quantity you can make at a
time. See p.86 Max. Copy
Quantity.
Original was misfed
at following point.
Open the part as
shown, then remove
it.
The original has jammed
(original misfeed).
Follow the on-screen instruc-
tions to remove the jammed
original. See xClearing Mis-
feeds, General Settings Guide.
Paper was misfed at
following point.
Open the part as
shown and remove it.
The copy paper has jammed. Follow the on-screen instruc-
tions to remove the jammed
paper. See xClearing Mis-
feeds, General Settings Guide.
Message Problem/Causes Solutions
DolphinC2_GBcopy_F_FM.book Page 68 Friday, February 4, 2005 3:32 PM
Vista de pagina 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 123 124

Comentarios a estos manuales

Sin comentarios