Ricoh G112 Instrucciones de operaciones descargar pdf (Pagina 186)

Monitoring and Configuring the Printer

186

• The “Port” specifies the port number of the direct printing port.

• The “bidirect” setting indicates whether the direct printing port is bidirec-

tional or not.

❖ Setting timeout

msh> diprint timeout [30~65535]

• You can specify the timeout interval to use when the printer is expecting

data from the network.

• The default is 300 seconds.

❖ Setting bidirect

msh> diprint bidirect {on | off}

• You can specify whether the direct printing port is bidrectional or not.

dns

Use the “dns” command to configure or display DNS (Domain Name System)

settings.

❖ View settings

The following command displays current DNS settings:

msh> dns

❖ DNS server configuration

The following command enables or disables the DNS server address:

msh> dns “number” server “server address”

The following command displays a configuration using the IP address

192.168.15.16 on a DNS 1 server:

msh> dns 1 server 192.168.15.16

• You can register up to three DNS server numbers.

• You cannot use “255.255.255.255” as the DNS server address.

❖ Dynamic DNS function setting

msh> dns “interface_name” ddns {on|off}

• You can set the dynamic DNS function “active” or “inactive”.

• {on} means “active” and {off} means “inactive”.

• ip1394 can be specified only when the IEEE 1394 interface is installed.

• wlan can be specified only when the IEEE 802.11b interface is installed.

Interface name Interface configured

ether Ethernet interface

ip1394 IEEE 1394 interface

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 298 299

Sin comentarios

Ricoh G112 Instrucciones de operaciones Pagina 186