Ricoh Container Stacker Guía de usuario descargar pdf (Pagina 23)

2-3

2.2.2 Decurler function

The Decurler function has three (3) options:

AutoSelect = The engine makes the decision to turn the Decurler ON or OFF depending upon

the paper weight and mode (Simplex or Duplex) of printing.

Enable = Decurler is turned ON.

Disable = Decurler is turned OFF. This is the default setting.

The Decurler function of the Container Stacker can be set via the Operator Control Panel, as follows:

1. Select the Finisher/ Decurler menu. The following screen is displayed.

2. Select the icon.

Use the following table as reference:

Icon (Decurler mode) Auto Select

Enable Disable

Print mode Simplex Duplex Simplex Duplex Simplex Duplex

Paper

Weight

Less than

28 lbs

On Off On On Off Off

(Bond) 28 lbs –

53 lbs Off Off

On (*1) On (*1) Off Off

[NOTE]

1. On = Paper passes through the decurler path; Off = Paper bypasses the decurler

path.

2. (*1) ; Paper exceeding 32lbs may not be fed through the decurler path.

(1) It is recommended not to select “Enable” when heavy paper exceeding 32 lbs is used.

OG A 02

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Sin comentarios

Ricoh Container Stacker Guía de usuario Pagina 23