Ricoh Aficio SPC400DN Instrucciones de operaciones descargar pdf (Pagina 73)

Ethernet Configuration

F Select [Effective] or [Invalid] using {T} or {U}, and then press the {OK} key.

Set other protocols you need to set in the same way.

•Select [Invalid] for unused protocols.

• Enable IPv4 to use the Pure IPv4 environment of NetWare 5/5.1, NetWare

6/6.5.

G Press the {Escape} key until the screen returns to the [Network] menu.

H If you use IPv4, assign the IPv4 address to the printer. Select [Machine IPv4

Address] using {T} or {U}, and then press the {OK} key.

To get the IP address for the printer, contact your network administrator.

I To specify the IP Address, press [IP Add.].

If you use IPv4, assign also Subnet Mask and Gateway Address. To assign

these, press [Subnet M] or [Gateway] instead.

J Enter the address using {T} or {U}, and then press the {OK} key.

Press the {T} or {U} key to enter the left most entry field of the address. After

entering the left field, press the {V} key, and then you can enter the next field.

After completing to enter in the all fields, press the {OK} key. Use this method

to assign Subnet Mask and Gateway Address.

• Do not set “011.022.033.044” as the IP address.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 197 198

Sin comentarios

Ricoh Aficio SPC400DN Instrucciones de operaciones Pagina 73