Ricoh 9021d Instrucciones de operaciones descargar pdf (Pagina 39)

Copying from the Bypass Tray

F Enter the horizontal size of the paper (Horiz.) with the number keys, and

then press the {OK} key.

G Enter the vertical size of the paper (Vert.) with the number keys, and then

press the {OK} key.

The “

Programmed” message appears.

H Place the originals, and then press the {Start} key.

I When the copy job is finished, press the {Clear Modes} key to clear the settings.

Note

❒ If you make a mistake in step

, press the {Clear/Stop} key, and then

enter the value again.

Reference

p.25 “Loading Paper on the Bypass Tray”

When Copying onto OHP Transparencies

When copying onto OHP transparencies, select [OHP (Transparency)] in Paper

Type.

Important

❒ OHP transparencies must be loaded face down in the tray with the notched

corner of the sheet in the appropriate corner of the tray.

❒ To prevent multiple sheets from being fed at once, fan OHP transparencies

before placing them on the tray.

❒ Remove copied sheets from the internal tray one by one.

A Select [Bypass] using {U} or {T}.

B Load OHP transparencies face down on the bypass tray.

C Press the {q} key.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 75 76

Sin comentarios

Ricoh 9021d Instrucciones de operaciones Pagina 39