Ricoh Interface Board GX2 Instrucciones de operaciones descargar pdf (Pagina 38)

Setting Up the Machine on a Network

30

3

❒ When you use the IEEE 1394 in-

terface on a network, you can-

not use the Ethernet interface in

the same domain. To use both

interfaces in the same domain,

set different values for [Sub-net

Mask:].

❒ The physical address (MAC ad-

dress) also appears.

❖

❖❖

❖ WINS Configuration

You can specify the WINS server

settings.

• On

If [On] is selected, specify the

[ Server] IP address as

“xxx.xxx.xxx.xxx” (“xxx” indi-

cates a number).

If DHCP is in use, specify [Scope

ID].

• WINS Server:000.000.000.000

• Scope ID

• Off

Limitation

❒ Enter [Scope ID] using up to 31

alphanumeric characters.

Note

❒ Default: Off

❖

❖❖

❖ IP over 1394

When you use the IP over 1394

function of the IEEE 1394 interface

to connect the machine to the net-

work, or you print from computer

with the IP over 1394 driver, you

must specify [Active]for [IP over

1394].

• Active

• Inactive

Limitation

❒ Printing with IP over 1394 is

possible under Windows

Me/XP and Windows Server

2003.

Note

❒ Default: Active

❖

❖❖

❖ SCSI print (SBP-2)

When you print using the SCSI

print client function supported by

Windows 2000, Windows XP, or

Windows Server 2003, you must

set [SCSI print (SBP-2)].

• Active

• Inactive

Limitation

❒ The IEEE 1394 interface can be

used when Windows 2000 Serv-

ice Pack 1 or later is installed. If

the Service Pack is not installed,

only one SCSI print device is

connectable via 1394 bus.

Note

❒ Default: Active

❖

❖❖

❖ Bidirectional SCSI print

Specifies the printer's response

mode etc. for status requests when

using the IEEE 1394 interface.

• On

• Off

Note

❒ Default: On

❒ If this is set to [Off], bidirectional

communication will not work.

❖

❖❖

❖ Host Name

Specify the host name.

❖

❖❖

❖ Domain Name

Specify the domain name.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 137 138

Comentarios a estos manuales

Sin comentarios